This is the FFB setup I use since some months with the TS-PC Racer. I built it from scratch, starting with zero values everywhere and monitoring changes with FFB meter. It has zero clipping with all cars, except maybe a bit in some extreme crashes. I think it helped me a lot to improve my car handling, default setup seems not good imo, with a lot of clipping on some cars. In the Thrusmaster panel I set everything to 100% so I do changes only in R3E: And in R3E: I also join the R3E controller profile for a quick test, you can copy it in C:\Users\<your user name>\Documents\My Games\SimBin\RaceRoom Racing Experience\UserData\ControlSet and find it in R3E in controller profiles section with the name "TS-PC Racer (chatcureuil)".
Thanks for sharing above. I am coming back to RRE after few years pause and and was a bit overwhelmed with numer of things to tune. I tried your settings and I like it more than default profile.
But it is mostly advised to set force de ressort and force d'amortisseur to zero in the driver settings. Is it different with the TS-PC racer?
Result is same if you set it to zero in the game or in the Thrustmaster driver. I prefer to manage all settings in game, that's why it's on 100% in driver and 0 in R3E.
DTM 2016 (tested the BMW) have strong FFB and there's a bit of clipping on some kerbs, it's better to reduce FFB multiplier from 2.5 to 2.2 or 2.3.
I tried this with my T300RS. Since the wheel is less powerfull also the settings were a little weak. I then multiplied all your values by 1,5 to keep treir relations the same and the result is really nice compared to the stock one. Thanks a lot for sharing!
My TS-PC Racer Settings. Really happy with it. All i do from there, is adjusting the FFB multipliers per car.
OK I got new one of these fancy wheels and my wheel is set at: Is this correct or should it be 1080? as its just on default. Also how do I map the esc button to the wheel, as I don't seem to find a setting for it?
It should be automatic, the game sets the rotation depending of the car you load and the preset used in garage -> steering settings.
In my search for FFB setting for my T300 I stumbled upon some ffb files on RaceDepartment (I think it was there). In settings, Steering Force Intensity was set to 16-20 %, Minimal Force 10 %, Vertical Load was set at 301 % and Lateral Force was set arround 80%. At first, I taught that this settings are wrong, but when I tryed them myself, driving felt really good and it was pretty much clipping free. Sorry for off topic, but I wanted to hear what you guys think about that bolded numbers in general.
no i have clipping only in grass/dirt out of the track and in very high speed turn, like everybody. i just use 99.99% of Ts pc racer (like my gpu i like seeing 99.99% usage) and you only 25% (maybe TX is enough) like i said I will post a video to show you how use 99.99% of ts pc racer with FFB meter my old TX could only keep this strenght 1 min after it will decrease, that's why i have bought ts pc racer. And that's why they create strong wheel And i hope we will have ts pc racer 2 And i have listened to you i have set "5%" minimal force so I feel so much more, thanks !
I took time to build my FFB setup with the FFB meter, I know I'm using in general between 80 to 90% of its capacities when I'm driving at the limits (remember I use the driver at 100%), without any clipping, even and especially in high speed turns. A turn taken at high speed is the case where you don't want any clipping, cause you're driving at the limits and want to feel every tiny change in the car behavior. If your FFB meter is on the red line and above, the subtle changes are not reproduced by the wheel cause it doesn't receive them, signal is saturated. And in a race car, every turn should be taken on the limit. ^^ But if you like it like that, it's your choice, I just tried to invite you to test something else for some days. FFB is the kind of thing that needs days to be appreciated. To answer your sentence on the other post, I don't think using 100% in the driver will put the wheel in danger, especially cause at the maximum FFB I can get in game, I'm still under the red line. That wasn't from me I use 3% and think I still can decrease it since I pushed the main intensity to 100% (was 90% in the first post).
i have tried your settings, I feel exactly the same effect i have with my settings but too much low/down. And Peter from R3E Steam forum has explained me clipping is normal and not dangerous for wheel.
I tried this for a while but my arms are aching after a couple of racers, either its to strong or I am going have to start lifting weights