Controller Profiles

Discussion in 'General Discussion' started by KW Studios, Apr 15, 2015.

  1. Herman

    Herman New Member

    Joined:
    Jul 18, 2017
    Ratings:
    +1 / 0 / -0
    my pedals work like it is analog. How can I change it to digital
     
  2. Chris Sercombe

    Chris Sercombe New Member

    Joined:
    Jan 29, 2015
    Ratings:
    +0 / 0 / -0
    You want your pedals to be analog.
     
    • Agree Agree x 1
  3. Herman

    Herman New Member

    Joined:
    Jul 18, 2017
    Ratings:
    +1 / 0 / -0
    Thanks for reply. No I want them to work digital. Not analog
     
  4. Herman

    Herman New Member

    Joined:
    Jul 18, 2017
    Ratings:
    +1 / 0 / -0
    I have drift oz speedlink racing wheel
     
  5. Chris Sercombe

    Chris Sercombe New Member

    Joined:
    Jan 29, 2015
    Ratings:
    +0 / 0 / -0
    Ah i see.
     
  6. Herman

    Herman New Member

    Joined:
    Jul 18, 2017
    Ratings:
    +1 / 0 / -0
    Thanks Chris, it seems i got i right. I pressed start and select and the left arrow on the steering. Then it is set digital. Thanks for all your help.
     
    • Like Like x 1
  7. Chris Sercombe

    Chris Sercombe New Member

    Joined:
    Jan 29, 2015
    Ratings:
    +0 / 0 / -0
    Cool, glad its working for you now.
     
  8. Jörg Menzel

    Jörg Menzel Member

    Joined:
    Feb 18, 2015
    Ratings:
    +8 / 0 / -0
    Hello, I need for my V2.5 (v291) reasonable FFB settings. Does anyone have good steering wheel and game settings for me?
     
  9. m.bohlken

    m.bohlken Well-Known Member

    Joined:
    Jan 29, 2015
    Ratings:
    +988 / 0 / -0
  10. Jörg Menzel

    Jörg Menzel Member

    Joined:
    Feb 18, 2015
    Ratings:
    +8 / 0 / -0
    Hello, I know that already. But these settings are a joke. Very bad FFB settings.
     
  11. Pfalzdriver

    Pfalzdriver Well-Known Member

    Joined:
    Mar 26, 2016
    Ratings:
    +85 / 0 / -0
    Hello Jörg,

    I'm using the CSW v2.5 myself since a couple of weeks, upgraded from v1.5. R3E always gave me the creeps finding reasonable FFB-Settings, right now I'm using those.

    SEN: AUT FF: 100 SHO: 100 ABS: 95 DRI:-4 FOR: 100 SPR: OFF DPR: OFF
    Code:
    FFB Rumble Pad="0" // Type of FFB controller:  0=wheel, joystick etc with force feedback, 1 = pad with rumble motor
    FFB Gain="1.0" // Strength of Force Feedback effects.  Range 0.0 to 1.0.
    FFB Min Force="0.0" // Minumum force, from 0.0 to 1.0
    FFB Min Force Linear Percentage="0.01" // Minumum force linear percentage
    FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
    FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
    FFB stationary friction="0.0" // Amount of friction applied to the steering wheel when vehicle is stationary
    FFB stationary friction speed="2.7780001" // Below this speed the stationary friction starts to be applied, in m/s
    FFB steer vibe freq mult="0.0" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
    FFB steer vibe zero magnitude="0.0" // Magnitude of steering vibration at 0mph (reference point).
    FFB steer vibe slope="0.0" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
    FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
    FFB steer force average weight="1.0" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
    FFB steer force exponent="1.0" // Steering force output "sensitivity".  Range 0.0 to infinity.  0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
    FFB steer force input max="-11500.0" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
    FFB steer force output max="0.2" // Maximum force output of steering force, recommendation 0.8 to 2.0
    FFB steer force grip weight="1.0" // Range 0.0 to 1.0, recommended: 0.4 to 0.9.  How much weight is given to tire grip when calculating steering force.
    FFB steer force front grip exponent="0.2" // Range 0.0 to infinity, recommended: around 1.0.  Exponent applied to grip weight.
    FFB steer force rear grip exponent="0.0" // Range 0.0 to infinity, recommended: around 1.0.  Exponent applied to rear grip loss weight.
    FFB steer damper coefficient="0.0" // Coefficient to use for steering damper.  Range: -1.0 to 1.0
    FFB steer damper saturation="0.0" // Saturation value to use for steering damper.  Range: 0 - 1.0
    FFB steer force balance mode="0" // Mode for how to add the steering forces together (lateral, load and diff).  Acceptable values: 0 = lat + load + diff, 1 = sqrt(lat^2 + load^2 + diff^2), 2 = sqrt(lat^2 + load^2) + diff, 3 = sqrt(lat^2 + (load + diff)^2), 4 = sqrt((lat + load)^2 + diff^2)
    FFB steer load multiplier="0.0" // Multiplier for vertical load on front tires.  Range: 0 - infinity
    FFB steer lateral multiplier="2.0" // Multiplier for lateral forces.  Range: 0 - infinity
    FFB steer rack factor="0.3" // How much of the lateral forces comes from steering rack.  Range: 0 - 1.0
    FFB steer load change exponent="1.0" // Exponent for the change in load on front tires.  Range: 0 - infinity
    FFB steer load change breakpoint="1.0" // Breakpoint (value that will not be changed) for the exponent on the change in load on front tires.  Range: 0 - infinity
    FFB steer spring coefficient="0.0" // Coefficient for steering spring. Range: 0.0 - 1.0
    FFB throttle vibe freq mult="0.0" // Scales actual engine frequency to force FFB vibration frequency.  Suggested range: 0.10 to 0.50
    FFB throttle vibe zero magnitude="0.0" // Magnitude of engine vibration at 0rpm (reference point).
    FFB throttle vibe slope="0.0" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
    FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
    FFB rumble strip magnitude="0.0" // How strong the rumble strip rumble is.  Range 0.0 to 1.0, 0.0 disables effect.
    FFB rumble strip freq mult="0.0" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
    FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
    FFB rumble strip pull factor="0.0" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
    FFB jolt magnitude="0.0" // How strong jolts from other cars (or walls) are.  Suggested Range: -2.0 to 2.0.
    FFB shift jolt magnitude="0.0" // How strong jolts you get from shifting.  Suggested Range: -2.0 to 2.0.
    FFB shift effect duration="0.0" // Duration of shift effect in seconds
    FFB slip effect="0.0" // Slip effect, from 0.0 to 1.0
    ffb slip freq multiplier="1.0" // Slip effect frequency. 1.0f = 1 cycle per wheel rev
    ffb slip wave type="0" // Slip effect wave type
    FFB pedal throttle vibe zero magnitude="0.0" // Throttle pedal vibration at 0rpm (reference point)
    FFB pedal throttle vibe slope="0.0"
    FFB pedal throttle slip vibe="0.0" // Throttle pedal vibration on tire slip
    FFB pedal brake slip vibe="1.0" // Brake pedal vibration on front tire slip
    FFB pedal brake vibe slope="5.0" // Slope for brake pedal vibration based on speed and braking %
    spring based range lock enabled="1" // Spring based range lock on/off
    spring based range lock strength="1.0" // Strength of the spring based range lock
    spring based range lock max rotation="1080" // Max wheel rotation, used when setting up spring based range lock
    Menu Control - Left Click="(0, 89, 0, 8)"
    Menu Control - Right Click="(0, 89, 0, 8)"
    Menu Control - Back="(0, 89, 0, 8)"
    
    For sure I'll adjust some stuff over time, but right now it feels pretty good for my personal preference. Tested with the BMW M6 GT3 and the BMW 235i FYI, using the F1-Rim.

    Feedback is always welcome. :)

    Edit:
    Made some changes. ;)
     
    • Like Like x 1
    Last edited: Aug 27, 2017
  12. FloydSG

    FloydSG New Member

    Joined:
    Oct 23, 2017
    Ratings:
    +3 / 0 / -0
    hello, for a t300rs alcantara edition, does someone here have a good setting ?
    thanks

    nb : sorry for my bad english
     
  13. Larry David

    Larry David New Member

    Joined:
    Jun 11, 2016
    Ratings:
    +0 / 0 / -0
    In case anyone came here from a google search about how to get your Xbox One Wireless controller to work, dont bother. The game does *not* support the wireless controller. You have to remap either the mouse or keyboard profiles which means no FFB at all. And the trigger axis which should be independent are seen as 1 axis in RRE. If you connect a USB cable to your controller then it is found in RRE and you do get FFB but I bought the wireless dongle for a reason..

    So if you want FFB you need to use a usb cable. If you want wireless then you'll have no FFB and have to remap 1 of the default profiles to even use it.

    The fact that this has been an issue since the dongle came out a few years ago and Simbin have done nothing says a lot.
     
  14. tripy

    tripy New Member

    Joined:
    Apr 30, 2017
    Ratings:
    +0 / 0 / -0


    I like how it feels ... the best I've tasted so far !!!!
     
  15. Ciccina2016

    Ciccina2016 Member

    Joined:
    May 24, 2018
    Ratings:
    +5 / 0 / -0
    Hello Guys
    can anyone post FFB settings for G29?
     
  16. tothrauldaniel

    tothrauldaniel Member

    Joined:
    Jan 22, 2017
    Ratings:
    +23 / 0 / -0
    An earlier post of mine.
     
  17. Krueger

    Krueger Member

    Joined:
    Jul 25, 2016
    Ratings:
    +23 / 0 / -0
    Hi thanks you very much. But I would like to know what is your setting for FEI on your V 2.5 please. Thank you.
     
  18. Jonathan Young

    Jonathan Young Member

    Joined:
    Dec 21, 2018
    Ratings:
    +12 / 0 / -0
    Hi does anyone have killer settings for the CSL Elite? I’ve been using the default settings and for the most part they’re ok. Open wheelers feel great but I’m not getting on with the FWD cars or, for example, the 911 cup.
     
  19. Paul Darke

    Paul Darke Moderator Beta tester

    Joined:
    Jan 29, 2015
    Ratings:
    +249 / 0 / -0
  20. Jonathan Young

    Jonathan Young Member

    Joined:
    Dec 21, 2018
    Ratings:
    +12 / 0 / -0