What about the DD OSW in Raceroom !!

After my visit at the Sim Expo, I saw this standing in Raceroom caffe, with years of sitting in it myself, looking for the right settings for an OSW, I was curious about the settings they use I ask it there they are so kind to me to share this !!, I come home make a new profile with the settings they have given and what appears to be true zero koma zero FFB nothing changed in the Mmos, only the in game settings ???? now I wonder what the problem is in the world of DD and especially the OSW with friendly greetings Georges

 

Sorry if I'm a little dense here, but I'm still undecided if this is a good thing or a bad thing?

So, the settings they gave you improved things, or did they make it worse?

 

this has not improved on the contrary, I had no FFB !!

 

Ok. Could you maybe share your previous settings (with which I assume it worked?) and the new ones please?

 

@18:00 I would like have this "small" simulator for my home too

 

Where do I start, I have 200 settings, or better said I had, after the test with the info of that guest my system crachste, but no panic I have one HHD somewhere with everything on it, but this will not be for now since I have had one foot operation and will be back in my rig somewhere at the end of September, I'll keep you informed

 

Thanks, and get well asap.

 

Sorry my friend, but I had read your message too quickly, on your question here are the settings of the guest in Raceroom caffe

 

Cheers for those, I put them in a report. One remark: In RR Cafes and at expos etc. they use a special event version of RR, so them using different settings might have different outcomes. However, I still think setting any valid combination of menu settings shouldn't result FFB loss, so it'll be investigated. When you're back home, if you can please upload your former settings and also the current controller profile, the one that has zero FFB.

 

I will do that in this week's time

 

Good Morning,
i am the bad guy in front of the Café. ;-)
Look here in my german video, so you get all settings explained.
If there are any open questions, please ask me here with PM or under this topic.

 

I was just planning to send you an e-mail asking whether this setting was linked to the motion system

 

No, the motion-system are seperate from FFB.

 

Can you tell me what your parameters are in Mmos

 

Im sorry, i'm using SimuCUBE 0.11b
But only force 100% and the correct steering angle,
nothing more.
No filtere, inertia, friction or damping.

 

Oké, so standard or default settings in Simucube only 100% Force !! correct??

 

So I have the settings tested and come to the conclusion that these settings do not really work, now I have some sense to the operation of Mmos and simucube, but if I use this and those other settings then I have no FFB or my engine block vibrates like crazy and then I have to use the switch kill ??? In the logic of the operation of a DD steering, there is apparently something wrong if I have an OSW with Moss and / or Simucube then they should all work at the same, because the engine is the same and the control logic is the same.
Or something must be wrong with my control device, but I doubt that.

 

Here's my FFB setup for my SimuCUBE Small MiGE with Biss-C encoder






Simucube Reconstruction Filter can also be put on 1 or 2 if Off does feel too rough

I'm happy with these settings.
For more force just increase the FFB intensity (the 30%). If you increase steering forces the FFB may clip. (see FFB graph ingame), Increasing FFB intensity doesn't get you into clipping.

 

Totally different from what the guy from Raceroom café has,
you can give the rest of your info tabs from Simucube??

 

Of course. But you have to wait for evening. The other tabs have nothing special.

FYI: I have the friction effect turned on to get a heavy wheel when the car stands still.