The VR controls, secondary ones...but found camera keys so I moved that around and solved it. Thank you!
Please help me. I am using pimax, but I cannot start it. When you press start using vr, a screen like an image appears, and then it goes black out and steam vr goes down.
Hi there, my problem with WMR is the screen at my feet. The centering button doesn't do anything. No matter if i set it on the keyboard or the steering wheel. Any suggestions are welcome! Greetings Einhard
Hi I raised this issue on Discord. It's a known bug that seems to be affecting the menus only. If you load into the track, you should find that the re centre button works ok. Hopefully a hot fix soon!
Hello community, I hope you can help me. I am new to the topics RR and VR. I need help with the settings, because I can't make it playable. But it has to work somehow, because upgrading the hardware is currently not possible. I have the following setup: - Oculus Rift S - i7 7700 - GTX 1060 6GB - 16gb RAM - SSD What is the best way to adjust the graphics? "-vr 1.5" is the current setting. Therefore the internal AAF is set to 0 The priority is clearly that the game runs smoothly and the track is easy to see. I can't and don't have to have eye candy - I know that. Thanks a lot for the help!
Have a look at https://forum.sector3studios.com/index.php?threads/vr-performance-tweaks-tips.13068/ The most important thing is to turn off shadows if you are struggling for performance usually.
Thanks a lot Thomas, I had orientated myself by this post and also adjusted everything accordingly. That was about a week ago. Had little time to test it since then. Now I have seen that the settings have all reset. This was probably due to the new update. I didn't know that the settings are all reset. I will test it later... Which is better? increase the "-vr x.x" setting OR increase the internal AAF (2x, 4x etc.) @ all others: who can still post specific settings for a GTX1060 - much appreciated!
Hi dazyluke, i am running a GTX 980 Ti on an i7 5860K with the following settings: SS on 1.2 (think it's not really noticable compared to 1.5) and MSAA on 8x shadows on "lowest"; reflections on "low"
Hi, I have massive performance issues when driving the Nordschleife. When driving on the Nürburgring GP I have 90 fps, 20 cars, with my settings. Nordschleife: with the same settings, same number of cars, I already have 45 fps when standing in the box. Motion Smoothing is not on in SteamVR, SS is set to 1.5. Only the Nordschleife makes trouble. Is it normal?
I didn't test SS 1.0 Raceroom uses and old engine. My GPU is at around 30-40% my CPU at 80% :/ I have tested Assetto Corsa Competizione. Here my GPU is at 90% and CPU at around 40-50%, but I cannot say that it looks so much better VR is still at the beginning but I don't wanna miss it any longer
Doesn't look like -vr <ss_ratio> command param is needed anymore. SteamVR is using proper SS settings for the title, global or app specific. Now the question, what is the proper command for shortcut launching 64-bit R3E in OpenVR mode, the one that gets invoked from Steam launch menu.
Would be cool to see the ingame resolution somewhere to know what is going on. The whole VR thing seems to be a beta in Steam. To fine tune, find the right value for supersampling isn't easy in my opinion. Would be cool if there would be a benchmark tool for Raceroom that would makes it easy to compare settings.
You mean the resolution? Where? But not in the dash board right? I mean the thing at the buttom of the screen