[Physics Update] Tyres, force feedback, AI and general developments - 10/12/2019

Discussion in 'Car Information and physics updates' started by Alex Hodgkinson, Dec 10, 2019.

  1. Jason Carlson

    Jason Carlson Member

    Joined:
    Nov 8, 2019
    Ratings:
    +8 / 0 / -0
    That's what I thought too. I double checked that my speed readout is MPH but couldn't find anything else. I guess it's just easier to think in PSI how much I am adjusting the tire pressure, or if it's spring rate. So absolute values don't mean anything to me, but how much am I really changing a value is the point. So obviously not a big deal, but thought I would ask if there was a simple thing I was missing. Thanks for the reply.
     
  2. Zhenya

    Zhenya New Member

    Joined:
    Mar 4, 2016
    Ratings:
    +4 / 0 / -0
    it’s possible to do something so that visually it is also visible that the tire has burst.?
     

    Attached Files:

    • Agree Agree x 2
  3. GooseCreature

    GooseCreature Well-Known Member

    Joined:
    May 30, 2015
    Ratings:
    +670 / 0 / -0
    YES!!
     
    • Agree Agree x 2
  4. michael hartmann

    michael hartmann New Member

    Joined:
    Aug 24, 2015
    Ratings:
    +2 / 0 / -0
    hallo Leute,

    ich bräuchte mal eure Hilfe.

    Seit dem Update habe ich keine Motorvibration mehr. Egal wie hoch ich das einstelle, es kommt nichts. Habe das Controller - Profil schon 3 mal neu gemacht ohne Erfolg.
    Danke...
     
  5. Zhenya

    Zhenya New Member

    Joined:
    Mar 4, 2016
    Ratings:
    +4 / 0 / -0
    und im spiel wenn du den motor vibrierst?
     
  6. michael hartmann

    michael hartmann New Member

    Joined:
    Aug 24, 2015
    Ratings:
    +2 / 0 / -0
    es kommt nichts...
     
  7. fischhaltefolie

    fischhaltefolie Well-Known Member

    Joined:
    Feb 12, 2015
    Ratings:
    +1,037 / 0 / -0
    Reading this out of context, ojojoj:p
     
    • Funny Funny x 4
    • Disagree Disagree x 1
    • Wonderful Wonderful x 1
  8. CrimsonEminence

    CrimsonEminence Well-Known Member

    Joined:
    Dec 6, 2019
    Ratings:
    +102 / 0 / -0
    Spring/Feder Kanal an? Vlt. benutzt R3E jetzt diesen für den Vibrationseffekt, denn Motorvibration ist ein Doseneffekt, der eigentlich gar nichts im Physik-Mix zu suchen haben dürfte, könnte vlt. dahin "verschoben" worden sein, aber auch nur Spekulation.
     
  9. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    As far as I know the canned engine vibration effect has been disabled (for now).
    You should be able to activate it by editing the controller profile rcs file, but it is not recommended as it can interfer with the rest of the FFB effects and produce unwanted effects.
     
    • Informative Informative x 2
  10. michael hartmann

    michael hartmann New Member

    Joined:
    Aug 24, 2015
    Ratings:
    +2 / 0 / -0
    ohhh, das wäre schade wenn dieser Effekt deaktiviert wurde. Ohne Motorvibration fühlt es sich komisch an und ich habe nicht das Gefühl auf einer Strasse zu fahren.
    Spring/Feder werde ich noch testen. Danke
     
  11. pasquale1986

    pasquale1986 Member

    Joined:
    Nov 21, 2019
    Ratings:
    +24 / 0 / -0
    Hey guys, I got one question regarding the physics and tyre update:

    I regularly drive the Porsche GT3 Cup @ Nordschleife, but since the December Update I really have issues to prevent the tyres from locking up during braking even on Nürburgring GP. I already reduced max brake pressure, camber and shifted brake pressure to the further to the rear.

    Has anyone else a comparable experience with the GT3 Cup or is this pure user error (what always should be expected)
     
  12. CrimsonEminence

    CrimsonEminence Well-Known Member

    Joined:
    Dec 6, 2019
    Ratings:
    +102 / 0 / -0
    Du musst den Effekt, wie beschrieben, re-aktivieren. Spring/Feder hat anscheinend damit nix zu tun, der Effekt wurde entfernt. Ich habe die Vermutung weil dieser Oszillationen in Lenkrädern verschlimmert hat, da R3E nämlich gerne mal diese Angewohnheit zeigt...

    Say hello to the good ol' Porsche GT3 Cup car ;)
    Brake earlier, use not too much pressure to the front and trail off the brakes with focus. This car is extemely driver demanding on the brakes without ABS in every sim. :D
     
  13. pasquale1986

    pasquale1986 Member

    Joined:
    Nov 21, 2019
    Ratings:
    +24 / 0 / -0
    I know I have more than 100 laps of VLN-Nordschleife in the Cup Car in Raceroom and iRacing under my belt. I was specifically asking about a change in the brake regime after the December update because I am sometimes locking front brakes at less then 20% brake pressure right now

    Edit: initially and at high speeds e.g. at T1 Nürburgring GP, which was not the case before the update
     
  14. Zhenya

    Zhenya New Member

    Joined:
    Mar 4, 2016
    Ratings:
    +4 / 0 / -0
    Ich habe auf Deutsch geschrieben! was immer noch krank mit dem Motor wurde :)
     
  15. CrimsonEminence

    CrimsonEminence Well-Known Member

    Joined:
    Dec 6, 2019
    Ratings:
    +102 / 0 / -0
    Hey, okay, than you should know the deal already.^^ They both updated the car recently and both get the same reports of their bad braking. (also the rF2 Cup does make the life hard on the brake for example)
    Put brake bias more to the rear...this isn't unrealistic for rear engined cars, all the weight is on the rear and even under weight transfer to the front, you can still lock up fronts easily, leaving you without control.
    The Cup received a significant update to all its physics and behaviour, of course, also the braking has another behaviour now. Trail off more concentrated from the brakes, also don't smash them too hard initially, or the unloaded front (very significant in this car) will lock up very fast while going straight. Listen to what the car wants, if it locks up or not and you will improve quite fast on it, i think.

    You definetly have to tip-toe it more, now.
     
    • Agree Agree x 1
  16. Zhenya

    Zhenya New Member

    Joined:
    Mar 4, 2016
    Ratings:
    +4 / 0 / -0
    If you want engine vibration, why don't you turn it on in the game?!
    I play accuforce at the moment there is vibration on gt3 on dtm it is not
     

    Attached Files:

  17. michael hartmann

    michael hartmann New Member

    Joined:
    Aug 24, 2015
    Ratings:
    +2 / 0 / -0

    ich habe die Vibration ja auch dort eingestellt. Aber es kommt keine Vibration....
     
  18. fischhaltefolie

    fischhaltefolie Well-Known Member

    Joined:
    Feb 12, 2015
    Ratings:
    +1,037 / 0 / -0
    @Женя there' s nothing wrong with your post and no offence from my side.
    The answer of @michael hartmann deliberately misunderstood gives this conversation a slightly saucy, lewed touch.
    Sorry, the joke lies behind the language barrier.
     
    • Agree Agree x 2
  19. sigi1949

    sigi1949 New Member

    Joined:
    Dec 9, 2019
    Ratings:
    +0 / 0 / -0
    OK, das Update ist zweifellos eine grosse Verbesserung. Und hat auch grosses Lob verdient. Doch was die neue Physic betrifft, so ging sie für mich beim M1 wohl ganz ordentlich daneben. Wenn man im richtigen Leben auch über 300 fährt (in Deutschland ja noch möglich...yuhhhhoooo) tut es geradezu weh, wie der M1 jetzt bei 250 oder so auf der Strasse herum schwimmt. Für mich ist das niemals realistisch. Das war vorher viel besser. Ich las auch schon Wehklagen, von besorgten Usern wegen den 1992is???.

    Nun sehe ich dass es den M1 auch in einer anderen Kategorie gibt. Hat der eine andere Physik? Oder lohnt es sich wenn ich diese horrende Summe (lach) dafür ausgebe?

    Und noch was.. Für mich fehlt einfach eine wirklich gute Analysemöglichkeit. Soviel ich weiss war sowas schon in GT6 auf der PS3 möglich. Dort konnte man 2 Fahrzeuge hochgenau miteinander vergleichen. Eine sehr gute visuelle Lösung um fahren zu lernen. Das normale Replay eines Rennes ist doch schon da in Raceroom. Wo ist das Problem, die eine oder andere Kameraführung (z.B. von oben) noch dranzuhängen, zwei Autos auswählbar zu machen und diese parallel mit der Anzeige von Tempo, Gas, Bremsdruck, Gang, Reifentemp, Zeit usw. in einer Auflösung von ca. 1/10 Sek über Tastendruck bewegbar zu machen und anzuzeigen. Bestimmt würden viele User für einen solchen Button gerne ordentlich bezahlen. Ich auf jeden Fall.

    Und dann hätte ich noch was am FFB zu meckern. Ich frage mich, warum beim Rutschen der Vorderachse das Gaspedal vibriert. Ich denke das ist allein Sache des Lenkrads. Ist es nicht nur dann realistisch, wenn beim Bremsen das Bremspedal, bei Wheelspin das Gaspedal und beim rutschen das Lenkrad vibriert??? 3 Parameter und die Sache wäre geritzt?? Habe mir spasshalber zum G29 noch das Fanatec-Set geholt. Liegt das Problem an denen? Oder gebt Ihr die einzelnen Parameter gar nicht raus?
     
  20. FormelLMS

    FormelLMS Well-Known Member

    Joined:
    Apr 8, 2015
    Ratings:
    +229 / 0 / -0
    I think it's not very respectful to write in own languages. Could we please all write here in the forum standard language again?
    I really start to dislike unrespectful behaviour.

    Sorry for asking for that.
     
    • Agree Agree x 15
    • Disagree Disagree x 1