Tire temperatures - setup helper

Discussion in 'Car Information and physics updates' started by MarcoP, Aug 12, 2021.

  1. BeefMcQueen

    BeefMcQueen Well-Known Member Beta tester

    Joined:
    Jun 26, 2018
    Ratings:
    +183 / 0 / -0
    That's correct. A suggested delta value of -0.5 means half a degree more negative than your current setting.

    Oli
     
    • Agree Agree x 1
  2. Rage Quit #alt_f4

    Rage Quit #alt_f4 New Member

    Joined:
    Mar 4, 2018
    Ratings:
    +2 / 0 / -0
    But it doens make sense. If you have minus 3.5 and you need to take 0.5 it should be minus 3.0?
    I'm so confused sorry
     
  3. BeefMcQueen

    BeefMcQueen Well-Known Member Beta tester

    Joined:
    Jun 26, 2018
    Ratings:
    +183 / 0 / -0
    If you have a camber of -3.5 (negative) and the tool suggests a change of -0.5 (also negative) after some more laps, it's -3.5 - 0.5 = -4.0 Because the app tells you to go even more negative.
    If the tool suggests a positive value, then you're running too much camber (i.e. too much negative) So for example -3.5 + 0,5 = -3.0

    Hope that doesn't confuse you even more...

    Oli
     
    • Agree Agree x 1
  4. Rage Quit #alt_f4

    Rage Quit #alt_f4 New Member

    Joined:
    Mar 4, 2018
    Ratings:
    +2 / 0 / -0
    Thanks man. I think that makes sense. It the part of being negative that confused me. Sorry for all the questions. Thanks once again
     
    • Like Like x 2
  5. Andreas Becker

    Andreas Becker New Member

    Joined:
    Mar 2, 2021
    Ratings:
    +0 / 0 / -0
    Sry, where can i find the zip for extract!? - THX guys
     
  6. BeefMcQueen

    BeefMcQueen Well-Known Member Beta tester

    Joined:
    Jun 26, 2018
    Ratings:
    +183 / 0 / -0
    The zip file should be attached to the first post.

    Oli
     
    • Like Like x 1
  7. NicoCL68

    NicoCL68 Member

    Joined:
    Nov 23, 2020
    Ratings:
    +21 / 0 / -0
    I'll do serious test. Very interesting.

    In my first try with BMW M6 at Road America, after 5 laps, close to 25Km so, the tool sugest me some changes in cambers but no changes in tyre pressures. Was my tyre pressures already perfect ? (not a base setup, I was working on this for a while) Or is not working ?

    I'll give feedback soon
     
  8. BeefMcQueen

    BeefMcQueen Well-Known Member Beta tester

    Joined:
    Jun 26, 2018
    Ratings:
    +183 / 0 / -0
    This is quite possible: if the temperature in the middle of the tread is exactly half the difference between inside and outside temperature, the pressure is perfect. But if the difference between inside and outside is not big enough, the tool suggests more camber. After this change, however, an adjustment of the pressure may be necessary...

    Oli
     
  9. MarcoP

    MarcoP Active Member

    Joined:
    Aug 3, 2021
    Ratings:
    +31 / 0 / -0
    As Oli already said, this is possible. Seems you already made a good job.

    I am looking forward to your feedback.
     
  10. meszrum

    meszrum New Member

    Joined:
    Jun 19, 2021
    Ratings:
    +2 / 0 / -0
    This is a game changing app. It resolved my tire temp issues during longer races.
    Just works perfectly for me and fully unlocks potential of asymetric corrections.
    Not to mention how much time it saved.

    Thank you.
     
    • Like Like x 1
    • Agree Agree x 1
    • Wonderful Wonderful x 1
  11. NL-Jos

    NL-Jos Well-Known Member

    Joined:
    Jun 5, 2015
    Ratings:
    +182 / 0 / -0
    When i use vr, is this tool vissible on screen to use or absolutely not to use in combination with VR
     
  12. MarcoP

    MarcoP Active Member

    Joined:
    Aug 3, 2021
    Ratings:
    +31 / 0 / -0
    I use VR myself. But sadly the overlays are not shown in VR.
    You can toggle the monitor view so raceroom is shown in VR and on screen as well. This way you can drive im VR and make the changes on your screen. The overlays appear on your computer screen as well.
     
    • Like Like x 2
  13. NL-Jos

    NL-Jos Well-Known Member

    Joined:
    Jun 5, 2015
    Ratings:
    +182 / 0 / -0
    But wil it come for VR in the future?
     
  14. MarcoP

    MarcoP Active Member

    Joined:
    Aug 3, 2021
    Ratings:
    +31 / 0 / -0
    I am not sure. May be I‘ll find a way, but at the moment I don‘t know how to bring the overlays to the goggles.
     
  15. NL-Jos

    NL-Jos Well-Known Member

    Joined:
    Jun 5, 2015
    Ratings:
    +182 / 0 / -0
    Ask @OtterNas3 an option?
     
  16. David Jazbec

    David Jazbec New Member

    Joined:
    Aug 28, 2020
    Ratings:
    +0 / 0 / -0
    Where can i download your program?
     
  17. David Jazbec

    David Jazbec New Member

    Joined:
    Aug 28, 2020
    Ratings:
    +0 / 0 / -0
    Nevermind, found it :)
     
  18. MarcoP

    MarcoP Active Member

    Joined:
    Aug 3, 2021
    Ratings:
    +31 / 0 / -0
    He uses the web overlay which can be activated with a start parameter for raceroom. This is completely different from what I‘ve done and I assume that you can only activate one overlay.
    Otterhud is definitely too good to replace it with what my overlay would show.
    And additionaly it is only shown when on track at least as far as I know.
     
    • Like Like x 1
  19. Nono757

    Nono757 New Member

    Joined:
    Sep 2, 2021
    Ratings:
    +0 / 0 / -0
    Bonjour ou télécharger le fichier svp?
     
  20. MarcoP

    MarcoP Active Member

    Joined:
    Aug 3, 2021
    Ratings:
    +31 / 0 / -0
    Quel malheur. Sorry I don‘t speak french.