Fanatec csw firmware and driver updated.

Discussion in 'General Discussion' started by Thomas Cameron, Jun 3, 2015.

  1. Thomas Cameron

    Thomas Cameron Well-Known Member

    Joined:
    Feb 19, 2015
    Ratings:
    +53 / 0 / -0
    • Informative Informative x 3
  2. ViperNo23

    ViperNo23 Member

    Joined:
    Feb 1, 2015
    Ratings:
    +17 / 0 / -0
    thanks for the heads up.

    In this driver there also is a new firmware for the clubsport pedals V2.
    Do you know how to set the the pedals into bootloader mode?
    I couldn't find anything on the web so far...
     
  3. Thomas Cameron

    Thomas Cameron Well-Known Member

    Joined:
    Feb 19, 2015
    Ratings:
    +53 / 0 / -0
    The pedals work on the normal drivers.
    The included firm ware is for the wheelbase.;)
    Uninstall your old drivers first.

    Important keep the wheel on when installing drivers or firmware.

    Switch the wheel off after installing the drivers and keep pressing the on button till it flashes blue. It's now in bootloader mode,Now the firm ware updater software will pop up,After installing some communication drivers, just click update firmware,let it finish once done switch off the wheel then back on and it'll flash cal ,now straighten the wheel and press the tuning button then the 2 sticks to reset centre.

    Switch off and back on and your done.
    I've added the csw manual for more detailed instructions.
     

    Attached Files:

    Last edited: Jun 4, 2015
  4. ViperNo23

    ViperNo23 Member

    Joined:
    Feb 1, 2015
    Ratings:
    +17 / 0 / -0
    popped up for me while looking into the property page for the Pedals under the update tab (and clicking wildly around the version info) :)
     
    • Love it! Love it! x 1
  5. ViperNo23

    ViperNo23 Member

    Joined:
    Feb 1, 2015
    Ratings:
    +17 / 0 / -0
    That's true for the wheelbase. ;)
    Dunno why a firmware update (I think it was v3) popped up for the clubsport pedals v2. o_O
    and I have absolutley no idea how to switch the pedals to the bootloader mode (if that's even possible for the pedals v2)
     
  6. Thomas Cameron

    Thomas Cameron Well-Known Member

    Joined:
    Feb 19, 2015
    Ratings:
    +53 / 0 / -0
    I think the update was mainly to add xbox one and ps4 compatibility anything else? No update notes yet.

    Could you link me the pedal firmware?
     
  7. ViperNo23

    ViperNo23 Member

    Joined:
    Feb 1, 2015
    Ratings:
    +17 / 0 / -0
    I didn't download anything else.
    Normally the drivers for the pedals are in the update for the CSW too. (and maybe the firmware too)
    When I can get my hands on my rig today I'll check again and maybe get some pictures.

    Let's see how we can solve this one :)
     
  8. euphoreon

    euphoreon New Member

    Joined:
    Apr 4, 2015
    Ratings:
    +4 / 0 / -0
    Is there a workaround to get correct rotation/steering rate for cars with CSW v2?
     
  9. Thomas Cameron

    Thomas Cameron Well-Known Member

    Joined:
    Feb 19, 2015
    Ratings:
    +53 / 0 / -0
    Not that I know of. You have to just change it in wheel settings manually 900 for gp5 540 for dtm etc.
     
  10. Kurt Vanhee

    Kurt Vanhee Member

    Joined:
    Jan 29, 2015
    Ratings:
    +19 / 0 / -0
    Downloaded and installed. Apparently Fanaleds has also an update.;)
    After installing the new firmware, no rev leds, nothing on the display. Updating Fanaleds made it work again.
     
    • Agree Agree x 1
  11. Kurt Vanhee

    Kurt Vanhee Member

    Joined:
    Jan 29, 2015
    Ratings:
    +19 / 0 / -0
    Hmmm, anyone else with non-working rev leds?
    In Fanatec wheel property page they work, ingame not:(
    Thought it was working yesterday

    Uninstall and reinstall fanaleds makes it working again
     
    • Agree Agree x 1
    Last edited: Jun 6, 2015
  12. Sean Lander

    Sean Lander Well-Known Member

    Joined:
    Feb 10, 2015
    Ratings:
    +65 / 0 / -0
    Working just fine for me after I updated drivers and Fanaleds
     
    • Agree Agree x 1
  13. Thomas Cameron

    Thomas Cameron Well-Known Member

    Joined:
    Feb 19, 2015
    Ratings:
    +53 / 0 / -0
    Yes it should be fine after both are reinstalled.

    Luckily both were updated at the same time. :)
     
    • Agree Agree x 1
  14. SniperFire69

    SniperFire69 New Member

    Joined:
    Jun 14, 2015
    Ratings:
    +1 / 0 / -0
    Lucky for some but not me still have broken LED's on my V1 CSW and it also breaks the RPM indicators on my HUD Dash software which really sucks.

    as soon as I go back to the 2.05 driver all is fine. I have uninstalled fanaleds and reinstalled but no luck
    What changes does this driver bring?, if none then I will stick to the old one
     
  15. Kurt Vanhee

    Kurt Vanhee Member

    Joined:
    Jan 29, 2015
    Ratings:
    +19 / 0 / -0
    After installing i had no indicators or anything.
    It helped me to uninstall and reinstall Fanaleds.

    Maybe not everything is deleted..and by reinstalling this gives some conflicts?