Resolved wheel pulled to the right

First try after a new install all seemed to work fine except the view that has been fixed.

I modified the FOV and now my wheel (DD) does not work correctly.
As soon as i set the first gear and push the throttle the wheel is pulled to the right. If i break it stops.

Any idea?

 

I created another profile...solved

 

Interesting, I have a constant pull to the right as well since switching to the 12C. Did you delete the controller profile or the entire RaceRoom user profile?

 

I have deleted all custom user profiles and created another one.

 

Ok, thank you. Will give this a go tonight.

 

Try to set "engine vibrations" to zero.

It seems to play a role (and map a button in order to reset the ffb).

By the way set the minimum force to zero for a smooth ffb.

 

I have Engine Vibrations and Curbs both at 0. If I set either of them to even 1, the results are extreme. Like touching a curb will almost rip the wheel out of my hand. I think all 4 settings in that section are set to 0 for me. I even changed the Curb Pull Factor to 0 and it's still extreme.

I think i bumped the minimum force from 0 to 5 because the wheel had no weight to it, but I'll try 0 again tonight. Been through so many settings it gets confusing.

Reset FFB will resolve the times where there's nothing at the wheel? If so, this is a huge important tip! Thanks. Been paranoid that my races will start with a broken wheel.

Thanks

 

Jolt magnitude at 0 in file RCS

 

I'll try that out. I assumed that was only related to being hit by another car.

 

i also have the 12c. i solved the pulling to the right by putting 'slip effect' to 0

do you suffer from losing ffb when transitioning from prac/quali/race?

edit: just read through again, my bad. hopefully sector 3 will fix this problem soon, its game side not hardware fault? only get it on R3E, maybe a mixture of both not interacting well together? wierd