App Offical release of Crew chief version 4 - auto updating and shiny

Discussion in 'Community Workshop' started by mr_belowski, Jul 29, 2015.

  1. ravey1981

    ravey1981 Well-Known Member Beta tester

    Joined:
    Apr 15, 2018
    Ratings:
    +873 / 0 / -0
    Is there any way to store the data from the last session and call upon it during pre race setup? Clear data once race actually starts?
     
  2. mr_belowski

    mr_belowski Well-Known Member Beta tester

    Joined:
    Apr 23, 2015
    Ratings:
    +1,307 / 0 / -0
    i can probably make an exception for fuel consumption in some cases, but I need to be careful here theatchanging car and / or track doesn't allow stale consumption data to skew the fuel calculations. I'll look into it
     
    • Like Like x 1
  3. ravey1981

    ravey1981 Well-Known Member Beta tester

    Joined:
    Apr 15, 2018
    Ratings:
    +873 / 0 / -0
    Perhaps in-race fuel calc could auto reset after 1st lap and then calculate from there? As its is, when using CC to calculate starting fuel you have to remember to ask during qualy.....its not ideal.
     
  4. silvanob2

    silvanob2 Active Member

    Joined:
    Nov 2, 2015
    Ratings:
    +25 / 0 / -0
    And still no reaction from @mr_belowski ! :mad:
    What shall i do to catch your attention? ;)
     
  5. M-Bimmer

    M-Bimmer Well-Known Member

    Joined:
    Apr 10, 2016
    Ratings:
    +98 / 0 / -0
    Thank you.
     
  6. mr_belowski

    mr_belowski Well-Known Member Beta tester

    Joined:
    Apr 23, 2015
    Ratings:
    +1,307 / 0 / -0
    Silvanob, is this the question about your old device and shared memory translation? I've released 2 versions of that app, I don't know what your issue is or how it might be fixed
     
  7. silvanob2

    silvanob2 Active Member

    Joined:
    Nov 2, 2015
    Ratings:
    +25 / 0 / -0
    Yes it is this prob, but this mornin after looking to all my DL i found a file from you "translator 2.7" so i tried with this and it seems to work again but sometimes it stops for few seconds then it goes again.
    As R3E changed a few things in the last update, thats probably why it generates some bug.
    Here i send you the file "translator 2.7" maybe you can take a look and see if it works good on your side.
    I made it a zip file for to be able to upload here, all you do after DL is to change the extension to ".exe"
    Thanks, hope you can help
     

    Attached Files:

    Last edited: Aug 12, 2019
  8. Rmbonk86

    Rmbonk86 Active Member

    Joined:
    Feb 1, 2019
    Ratings:
    +25 / 0 / -0
    Alright I tried searching before I posted but.

    Is there a known issue with the app when using voice out requests? I was running a racing in my championship and requested a stop with no tires. I get refueled but the tires were changed anyway. Is there a setting that has to be disabled ?
     
  9. mr_belowski

    mr_belowski Well-Known Member Beta tester

    Joined:
    Apr 23, 2015
    Ratings:
    +1,307 / 0 / -0
    No know issue there, assuming you in game key bindings for navigating the pit menu match what the app is expecting. If tyres were already selected (highlighted green) in the active pit strategy then they'll be changed unless you give the "box, don't change tyres" command to override that.
     
  10. Rmbonk86

    Rmbonk86 Active Member

    Joined:
    Feb 1, 2019
    Ratings:
    +25 / 0 / -0
    After posting this did find that written in the help section. I had changed them and programmed them all to be on the wheel so I don’t have to reach for my keyboard. I assigned the request to a button near the dpad on my wheel, and the dpad will move through that menu then the button to accept the changes is also on the wheel. I’ll reset to what you have listed in help and try
     
  11. Rmbonk86

    Rmbonk86 Active Member

    Joined:
    Feb 1, 2019
    Ratings:
    +25 / 0 / -0
    I have 4 pitstop strategies.
    1 is change all tires and fuel.
    2. Change fronts only
    3. Change rear only
    And 4 only fuel
    When using your app should I disable leave them active ?
     
  12. Aleksey Gershin

    Aleksey Gershin New Member

    Joined:
    Aug 22, 2019
    Ratings:
    +3 / 0 / -0
    Is there a list of all available voice commands for Crew Chief in R3E somewhere?
     
  13. Rmbonk86

    Rmbonk86 Active Member

    Joined:
    Feb 1, 2019
    Ratings:
    +25 / 0 / -0
    No just in the help section of the app.
     
  14. mr_belowski

    mr_belowski Well-Known Member Beta tester

    Joined:
    Apr 23, 2015
    Ratings:
    +1,307 / 0 / -0
    unfortunately the app can't 'press' buttons on the wheel, it can only press keys. So if you want CC to manage all your pit menu interactions you have to assign keys to the various actions in-game, ensuring these match the expected keys in the app. I recommend just using the default ones here, so it's

    w (menu up)
    a (menu left / decrease)
    s (menu down)
    d (menu right / increase)
    q (menu toggle)
    e (menu select)
    r (request pit)

    once they're assigned you have full control over the pit menu with voice commands and can say stuff like "add fuel, 20 litres", "box, change front tyres only" and "box, hard tyres". The full list of standard commands is in the readme file, with a few special ones in the saved_command_macros.json file (where commands need to employ some additional logic like calculating how much fuel is needed to finish the race.


    For reference, the 'regular' R3E pit menu commands are:

    "pitstop clear tyres" / "pitstop don't change tyres" / "box, clear tyres" / "box, don't change tyres"
    "pitstop change all tyres" / "box, change all tyres"
    "pitstop change front tyres only" / "box, change front tyres only"
    "pitstop change rear tyres only" / "box, change rear tyres only"
    "pitstop fix front aero only" / "box, fix front aero only"
    "pitstop fix rear aero only" / "box, fix rear aero only"
    "pitstop fix all aero" / "box, fix all aero"
    "pitstop don't fix aero" / "box, don't fix aero"
    "pitstop fix suspension" / "box, fix suspension"
    "pitstop don't fix suspension" / "box, don't fix suspension"
    "pitstop serve penalty" / "box, serve penalty"
    "pitstop don't serve penalty" / "box, don't serve penalty"
    "pitstop refuel" / "box, refuel"
    "pitstop don't refuel" / "box, don't refuel"
    "pitstop next tyre compound" / "box, next tyre compound"
    "pitstop hard tyres" / "box, hard tyres"
    "pitstop medium tyres" / "box, medium tyres"
    "pitstop soft tyres" / "box, soft tyres"
    "pitstop prime tyres" / "box, prime tyres" / "pitstop primary tyres" / "box, primary tyres"
    "pitstop option tyres:" / "box, option tyres"
    "pitstop alternate tyres" / "box, alternate tyres"
    "what are the pit actions" / "what's the pitstop plan" (reports the selected actions for the next pitstop)


    The macro-based commands are:

    "request pit" / "box this lap" / "in this lap"
    "cancel request pit" / "cancel pit stop" / "cancel pit request"
    "fuel to the end" / "fuel to the end of the race" (calculates the required fuel and adds it)
    "add fuel, x litres" (where x is > 0 and < 150)
    "next strategy" / "next pit preset"
    "previous strategy" / "previous pit preset"
     
  15. Rmbonk86

    Rmbonk86 Active Member

    Joined:
    Feb 1, 2019
    Ratings:
    +25 / 0 / -0
    Thank you that worked. Appreciate your help.
    I have been using the app for a while now but haven’t used the voice pit commands until now... mainly for spotting, tire temps , how much fuel needed to finish a race. Keep up the great work. It’s a wonderful piece of work :D
     
  16. MattStone

    MattStone Well-Known Member

    Joined:
    Mar 6, 2016
    Ratings:
    +169 / 0 / -0
    after installing the latest version of CrewCheif I now get this error
    upload_2019-9-2_20-19-43.png

    I downloaded the the file that the ok button redirects you to and ran it.
    It was obviously already installed as it asked if I want to repair it so I repaired it
    That still didn't work so I uninstalled>rebooted>reinstalled microsoft file but i still get this error

    Not sure what to try next!
    I'm running the latest version of Win10
     
  17. mr_belowski

    mr_belowski Well-Known Member Beta tester

    Joined:
    Apr 23, 2015
    Ratings:
    +1,307 / 0 / -0
    There was a hotfix release this morning (4.9.9.2) that was supposed to correct this error :(

    Can you post the app's console window output please
     
    • Useful Useful x 1
  18. MattStone

    MattStone Well-Known Member

    Joined:
    Mar 6, 2016
    Ratings:
    +169 / 0 / -0
    ok this is is strange....it just fixed itself!
    No idea how lol
     
  19. silvanob2

    silvanob2 Active Member

    Joined:
    Nov 2, 2015
    Ratings:
    +25 / 0 / -0
    @mr_belowski,
    Did you had time to look at the translator ?
     
    Last edited: Sep 2, 2019
  20. Slugger O'Toole

    Slugger O'Toole Member

    Joined:
    Aug 6, 2019
    Ratings:
    +5 / 0 / -0
    Hello @all

    I have his problem since i patched CC today:

    Attempted to initialise speech engine = false

    No more Voice command possible for me :-(
     
    • Agree Agree x 1