Hy, I have a problem with my pedals, and this only occurs in this game, I tested it with input softwares etc. The game detects 100% throttle and brake application at let's say 50%-70% pressed pedals. And I have to press the pedals 5%-10% before they are detected. The deadzone settings are 0% lower, and 100% upper, sensitivity is 0%.
I tried editing the ControlSet file with no success, and also my wheel setup is not detected after PC restart, so I have to manually disconnect and reconnect it.
I have the same problem: https://forum.sector3studios.com/in...10-throttle-and-brake-wrong-stroke.409/page-2
What wheel and pedals are you using and do they appear correctly named in the in-game controller profiles section? If they do, click that profile and try reassigning your throttle. Deadzones seem to be set as they should (but you better leave sensitivity to the default 50% which means a linear behaviour) Oli
Problem fixed, I edited my .rcs setup files that shown on the picture, the one on the top being the brake and the last one being the throttle. By default the center value was 0.5, I had to lower them to 0.0.
That's very strange and I suspect your wheel is detected as a controller rather than a wheel. Or do you have your pedals set as combined in your driver, by chance? It shouldn't be necessary to edit the rcs file at all to get your pedals work properly. Still would be interesting to know, what hardware you're using and if the profile is named accordingly. Oli
BTW, the game handles gamepads differently than wheels. Take a look at this guide, there are some specific settings for gamepads: https://forum.sector3studios.com/index.php?threads/a-beginners-guide-to-gamepads.9250/