Hi All, I updated my wheel to 756 W10 compatible (link) Since then I started having the problem of not matching the revolutions of my wheel with the car. I am on 900 degrees, have to turn the wheel fully to get half a revolution on the car. Tried matching wheel, variantion in degree settings, but nothing really helps. Also made a new profile, but none helped Anyone got any ideas?
all cars ? is the game seeing your wheel in the car setup menu , as 900°, is it in the fanatec control panel as 900°... ? Andi
Yes, Fanatec wheel is on 900°, so is the game. In the menu, advanced setting, test zone, it registers from 0 - 100% as a 900° wheel. It just doen't do so in game and have not tried all cars, but all of which I tried have the same issue (so far). EDIT: Tried a number of cars now, it all differs. DTM needs less input than a GT3 cars or LMP2. It just does not match the wheel, and before hand it did.
I had an issue with a CSR wheel rotation being about half what it should be, tried different wheel settings, driver settings, the only thing that worked properly for me was to create new setups for cars from default, if i used old setups it was way too sensitive, new setups worked as it should.
What i am saying is i had to change my car setups to default after changing my wheel, you updated your firmware, the wheel behaves differently, try using a default setup and see what happens. If you have or are, sorry i can help nomore!
Solved it! The GT3RS has a sensitivity setting which you can set for how many degrees of rotation you want it. In RaceRoom that needs to be turned off! Works perfectly again! Thanks for the reactions so far!