PBO is a bit hard on the CPU, it brings a lot of heat, and the clocks are less stable, so for this DX9 benchmark relying exclusively on CPU/RAM...
Ho ho ho it took me a bit of tinkering but... I got it ! [ATTACH] [ATTACH] [ATTACH]
From this CPU-Z capture, your RAM isn't running at 3666, but 2666 (1330 Mhz x2) with pretty loose timings 19-19-19-43 so I would check in your...
Actually I'm using a 3200c14 kit OC to 3666c14 using 1usmus Ryzen DRAM Timing calculator, and DX9 benchmark thread proved the gains to be real...
If it's just above the CPU limit (less than 10%) faster RAM could probably get you there as this is what seperate our systems in terms of...
Yes VR users like us are limited by CPU/RAM performance, as you already saw in Dx9 CPU Benchmark thread, despite using same processor, your slower...
The benchmark is very light on GPU and heavily CPU bound, so an improvement on RAM speed is giving more headroom limiting the CPU bottleneck, it...
Ryzen 1000 series had a 2666 memory speed support iirc, 2000 series was 2933 by design and 3000 series is 3200, and you're right agesa updates...
What is your mobo ? It's a bit odd to have a limit @2933 it could be that it needs a slight bump in voltage to work absolutely fine at the...
Oculus server is the only process I originaly keep the same affinity than RRRE64.exe I've done this because it is as important as the game itself...
Slowly escaping the average :tearsofjoy: I'm 46!
You just need "C:\Program Files (x86)\Steam\Steam.exe" -applaunch 211500 -vr you don't need to call it with a start, it sometimes needed...
It shouldn't, try the check suggested by Maarten, there could be a problem with the file path or something to pass Oculus arguments.
There are things you can do with the CV1 it was explained by Thomas Jansen in VR Performance Tweaks & Tips thread and you can automate it a bit...
@valerioalba and @Tebb just add a dedicated setting to RRRE64.exe and set Application detection level to None That way you can still use RTS and...
Ok, another idea, when I've used frame limiter I've set it to 100fps but I have a CV1 at 90Hz. I tested lower cap higher cap but arround 10%...
@Leo Valentino I don't know what your monitor refresh rate is, but I would suggest to set a frame limiter in RivaTunerStatistics at this frame...
@FormelLMS HP Reverb isn't using Oculus tools at all and I'm not even sure it uses Steam VR, so I can't tell how to achieve it unfortunately as I...
Here are the latest results on Ryzen Balanced Power Plan, Stock CPU settings in BIOS (ABBA) just modified AutoOC at +75Mhz and tweaked memory...
@Balrog I'd be mad as well :D It is 100% memory config related. In July I switched from 1080 to 1080ti and gained nothing (in this test ofc). Also...
Separate names with a comma.