2 Leo Bodnar Boards causing conflicts in Key Bindings

Discussion in 'Hardware' started by Michael Jeffries, Nov 7, 2019.

  1. Michael Jeffries

    Michael Jeffries New Member

    Joined:
    Jul 12, 2018
    Ratings:
    +4 / 0 / -0
    Hi Guys!
    I currently have HPP PRX Pedals which use a Leo Bodnar Board, but I recently added the SimRacingMachine's Fanatec Emulator Quick Release for a Turn Racing Wheel (3rd party wheel).
    They also use the same board so it comes up as a bu0836a-1 (for the 2nd controller for the wheel), but then when im remapping the buttons, the brake pedal isnt binding, and some of the buttons on the wheel are coming up as doubles on my 7-way stick on the Turn Racing wheel.

    How can I fix this issue? It shows the HPP pedals under BU0836a and BU0836a-1 for the Wheel, but somehow it's still conflicting.
     
  2. Christian Göpfert

    Christian Göpfert Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,233 / 0 / -0
    Hi,
    where does it show these IDs exactly?

    I'm thinking maybe this is down to those two boards having the same product-ID and hence are considered the 'same' device by the game? Have you checked the device IDs for both devices in Windows' device manager?
     
  3. Michael Jeffries

    Michael Jeffries New Member

    Joined:
    Jul 12, 2018
    Ratings:
    +4 / 0 / -0
    I didnt do that, but I can check later. I know in RaceRoom it added a "-1" to the end of the controller name in the settings though.

    Do you know if it's possible to rename it in Windows so they won't conflict?
     
  4. Christian Göpfert

    Christian Göpfert Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,233 / 0 / -0
    That's the thing, afaIk hardware/device IDs (at least those of USB devices) are embedded in the device's firmware and I don't think you can change them. :/
     
  5. HoiHman

    HoiHman Well-Known Member

    Joined:
    May 20, 2016
    Ratings:
    +140 / 0 / -0
    • Informative Informative x 1
  6. pierredietze

    pierredietze Well-Known Member

    Joined:
    Sep 8, 2017
    Ratings:
    +49 / 0 / -0
    How does it work? You can dl a flash tool to upload new firmware, but how to rename the device? Is it possible to rename the microBBI also?
     
  7. HoiHman

    HoiHman Well-Known Member

    Joined:
    May 20, 2016
    Ratings:
    +140 / 0 / -0
    You can't rename it, only upload a different firmware (10 max) which gives the device a different name.

    You have to ask LB is this is possible withe MicroBBi to