Released 30-06-2016 RaceRoom has been updated

Just tried with // in front of that config line, same thing, vibrations 100%. For some reason the game also lost that i had V3 pedals, got "missing device." Had to remap pedals.

 

Ok i have become feedback and it dosn`t work

im trying to figure it out.

 

Ok try this:

set all values:

FFB pedal throttle vibe zero magnitude="0.00" // Throttle pedal vibration at 0rpm (reference point)
FFB pedal throttle vibe slope="0.00"
FFB pedal throttle slip vibe="0.00" // Throttle pedal vibration on tire slip
FFB pedal brake slip vibe="0.00" // Brake pedal vibration on front tire slip
FFB pedal brake vibe slope="0.00" // Slope for brake pedal vibration based on speed and braking %

one guy with csp and v3 pedals told me that feeling is much better with that values but the vibration isnt complete gone just a better feeling.

 

Do you know what it never occurred to me dissconect the motors !

This is the first time I have had the motors work and it just doesn't feel right for me so by physically disscontecting them will also stop them from springing into life if another sim starts to support these feature.

Thanks.

Jason.

 

Yes the Vibration in the Pedals is gone, but now i have a Vibration in V2 Wheelbase himself. Did no changes in the FFb Setting. Never had that before, all Ingame Vibration are OFF

 

Is it a wheelbase vibration or steering wheel vibration. If you are using fanaleds maybe engine is checked off which gives us motor vibration.

 

It is a Wheelbase Vibration, using the Universal Hub. Fanaleds is not running

 

No one with a V2 Wheelbase here using Raceroom or no Probs with it after the update?

 

V2 here, no problems.
I got steering wheel vibration, but that is enabled.

 

@Marco Müller If you have a Wheel that supports settings on it through a small display,go to ABS and set it off.
Or take a look here https://www.fanatec.com/us-en/support/faq/faqknowledgebase

 

it is Off, been racing Raceroom every day but after the udate i have this issue. If i push throtle it begins to rumble in the Base

 

Sorry,but i don't own a Wheelbase.Can't help you anymore.Try to find something in the manual of your hardware or simply search in the internet.Good luck mate

 

Marco forgot to Change one value now it Works for him

 

Yes, did this, all to 0.0 and it seems that pedal rumble is almost or fully gone. V2 base with V3 pedals.

 

However I will try and play with FFB Pedal settings and see if i can get brake and throttle slip work to a nice level..

 

Thanks Tarik!! V3 pedals vibration off

 

Didn't have time to experiment , love the new feature for v3 ,but am getting vibration when tires aren't spinning. Hopefully someone posts a recommended setting for this. Also abs isn't strong enough.

 

With this last update,I noticed the problem with replays. It shows the progress when you are preparing car to the race with countdown and then suddenly in race already, but the start is missed.

 

Yepp - and it is reported in the internal Bug-tracker from Christian: https://forum.sector3studios.com/in...ultiplayer-race-bug-due-to-garage-phase.5857/

 

several connection losses in MP during the day. Really unfortunate, majority of the time it is working however. Was "stable" connected to a server (qualifying session over 30 miniutes...), then in race after second or so lap, lost connection. Once was followed by some error code (think 12500 or so) that required quit to desktop. (win7 and connection seems ipv4). It works more than it doesn't, but frequency seems similar as the days before the patch :/ Think one of five races ends in disconnection.