Hi I have a brake locking in front of Radical P2. As soon as I touch the brakes, they instantly lock. I've been to garage settings, fiddled, but no success. Please help. Thanks, Ian
I still get an intermittent loss of steering. I've tried many things, but some of them work, intermittently. Please help. Thanks, Ian
How is that at all helpful? @Ian Robinson What are you seeing inside the "Advanced Settings" sub-menu? Are the pedal bars looking normal? It could be a calibration problem, or perhaps new drivers are needed for whatever pedal set you are using.
For me All Cars P2 Good! ... 6m 17.342s - 0:00.000 - Mistral M531 free 6m 18.606s - 0:00.000 - Radical SR9 Judd 6m 20.281s - 0:00.000 - Radical SR9 AER 6m 20.696s - 0:00.000 - DMD P21 free But - Chevrolet Daytona - this CUP 100%
How is that at all helpful? ... All cars are driven the same ... But - Chevrolet Daytona - Must be - CUP 100%
@J-F Chardon @Georg Ortner @Christian Göpfert How long do we have to tolerate this behavior before @SVG BIOSPORT gets banned permanently ? He already had a temporarily ban in the past and he promised to stop spamming. But as you can see he doesn't seems to care.
jesus you are such a annoying person... im only a silent reader since some days/weeks and got pissed by this spamming.
For the first time since I use the internet I used the "ignore" function in a forum... it was just too much. Don't understand why this guy is allowed to keep going with all this nonsense spaming.
majuh How do I ensure brake pedal is properly calibrated? I've looked at all the settings and the wheel on my Toshiba laptop. Please help.
in the setup menu where you add all the buttons etc. there is above 4 (?) lines (wheel input, pedals...) when you press the pedal and the line go from 0-100% without stoping before reaching the pedal end range then it is ok.
Thanks Exiled Scotsman. My drivers are kept up to date. "Are the pedal bars looking normal?" On my P2, no....... "when you press the pedal and the line go from 0-100% without stoping before reaching the pedal end range then it is ok." It's not. "It could be a calibration problem" Perhaps one of you could talk me through setting it up a calibration?
which pedalset you got? look if there is (there is when from logitech or TM) in the software from the pedals/wheel. there you can calibrate. id should work after this in R3E.
I bought a new set from Thrustmaster. It's a T150 Ferrari Force Feedback wheel and two pedals. It's a mission to disassemble the pedals as I've made some adjustments (not to the pedals) to the supporting structure. (I've had a massive stroke in 2011.) Or, I think you're talking about the software. Where do I go to the software from the pedals/wheel?
sorry im not using TM since ~2-3 years now but in case of trouble ---> see the manual. EDIT: i dont know if this is working,but as i use them they had an "auto calibrate modus" after starting and initializing of the wheels you had to press every pedal 2 or 3 seconds to autocalibrate. but can be wrong... please take a look in the manual.