I guess it might a good idea for me to post my problems with GTR2 here and seek help. I've been running GTR2 mainly for its driving school, and I somehow have stood the trouble of incorrect wheel rotation settings. But now when I get into the track coach stages in the driving school, the wrong rotation angle really starts to make driving hard. This is how I set up my G27 profiler for GTR2: And this is my global settings: Now when I get into GTR2, the wheel rotation is 900 degrees instead of 270. For some reason it seems that GTR2 is the only game giving me this problem. I'm wondering if any of you have any tips for this? Does this part of my G27 settings look right? Should I use settings other than "Apply profiler to games automatically"? Thanks in advance.
Why would you want 270? Normally we use 540 in GTR2/Race07 and then I adjust the wheel lock in the car setup
540 doesn't work as well. 270 is just an example. If I set 540 in my GTR2 profile, it gives me 900 in GTR2; If I set 540 in my Race07 profile, it gives me 540 in Race07 correctly.
PIC 1. Put some FFB on spring, damper and the centering spring strength. Remove the use special game settings and the allow game to adjust...... PIC3. Do the same thing. And set wheel rotation to 270 degrees. PIC4. Do - Apply Persistent profile, choose R3E game instead, and then apply profiles to games automatically. Maby this can help... I´ll write a post in few - u might have to make some changes in the wheel setup file - still got it all from back then BTW - I have always been driving with 270 degrees, GTR2, GTL, RACE07 ect.
I never used game profiles, only use global settings http://www.racedepartment.com/threads/g27-profiler.113104/ http://www.racedepartment.com/threads/logitech-g27-settings.24662/
Sure it always happens, I can´t find my note-book ATM. Just moved to a new appartment - but I´ll find it You go to GTR2/Gamedata/userprofiles/*Name* Open the *Name*.PLR file - Find the section that contains: [ Controls ] Keyboard Steering="0.20000" Keyboard Throttle="0.50000" Keyboard Brake="0.50000" Keyboard Clutch="0.10000" Force Feedback="0" Mouse Steering="0" // Use mouse left/right movement to steer Mouse Throttle="0" // Use left mouse button to control throttle Mouse Brakes="0" // Use right mouse button to control brakes Mouse Gears="0" // Use mouse wheel to control gears Mimic Steering="0" // Mimic AI or pitlane assistance with force feedback Gear Select Button Hold="0" // Enable this option if using a gear select device that holds down a joystick button while in a gear and releases all buttons in neutral (such as the Act-Labs USB Shifter) Alternate Rearlook Activation="1" // if left look and right look are both pressed, rearlook becomes activated HMD Pitch Exponent="1.00000" // Exponent to apply to pitch tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster. HMD Yaw Exponent="1.00000" // Exponent to apply to yaw tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster. HMD Roll Exponent="1.00000" // Exponent to apply to roll tracking. > 1.0 makes tracking near-center slower, > 0 & < 1.0 makes tracking near-center faster. Options Num Controls="68" // Number of configurable controls displayed in options Freelook Mouse Pitch Speed="0.00100" // Freelook pitch speed when using mouse. Freelook Mouse Yaw Speed="0.00100" // Freelook yaw speed when using mouse. Freelook Keyboard Pitch Speed="1.50000" // Freelook pitch speed when using keyboard. Freelook Keyboard Pitch Accel="4.00000" // Freelook pitch acceleration when using keyboard. Freelook Keyboard Pitch Decel="4.00000" // Freelook pitch deceleration when using keyboard. Freelook Keyboard Yaw Speed="1.50000" // Freelook yaw speed when using keyboard. Freelook Keyboard Yaw Accel="4.00000" // Freelook Yaw acceleration when using keyboard. Freelook Keyboard Yaw Decel="4.00000" // Freelook Yaw deceleration when using keyboard. Freelook Up Limit="0.10000" // Freelook Up Limit, between 0 and 0.25. Freelook Down Limit="-0.15000" // Freelook Down Limit, between 0 and -0.25. TrackIR Pitch Down Limit="-0.15000" // Min: -1.00, Max: 0, Default: -0.15 TrackIR Pitch Up Limit="0.05000" // Min: 0, Max: 1.00, Default: 0.05 TrackIR Yaw Left Limit="-0.40000" // Min: -1.00, Max: 0, Default: -0.40 TrackIR Yaw Right Limit="0.40000" // Min: 0.00, Max: 1.00, Default: 0.40 TrackIR Roll Left Limit="-0.07500" // Min: -1.00, Max: 0.00, Default: -0.075 TrackIR Roll Right Limit="0.07500" // Min: 0.00, Max: 1.00, Default: 0.075 TrackIR Move Left Limit="-0.05000" // Min: -1.00, Max: 0.00, Default: -0.05 TrackIR Move Right Limit="0.05000" // Min: 0.00, Max: 1.00, Default: 0.05 TrackIR Move Down Limit="-0.05000" // Min: -1.00, Max: 0.00, Default: -0.05 TrackIR Move Up Limit="0.03000" // Min: 0.00, Max: 1.00, Default: 0.03 TrackIR Move Forward Limit="-0.25000" // Min: -1.00, Max: 0.00, Default: -0.25 TrackIR Move Back Limit="0.25000" // Min: 0.00, Max: 1.00, Default: 0.25 Axis [00, 00] Dead Zone="0.04000" // Controller 1 X Axis [00, 00] Sensitivity="1.00000" Axis [00, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues) Axis [00, 01] Dead Zone="0.00000" // Controller 1 Y Axis [00, 01] Sensitivity="1.00000" Axis [00, 01] Center="1.00000" Axis [00, 02] Dead Zone="0.00000" // Controller 1 Z Axis [00, 02] Sensitivity="0.50000" Axis [00, 02] Center="0.50000" Axis [00, 03] Dead Zone="0.00000" // Controller 1 RX Axis [00, 03] Sensitivity="0.50000" Axis [00, 03] Center="0.50000" Axis [00, 04] Dead Zone="0.00000" // Controller 1 RY Axis [00, 04] Sensitivity="0.50000" Axis [00, 04] Center="0.50000" Axis [00, 05] Dead Zone="0.00000" // Controller 1 RZ Axis [00, 05] Sensitivity="1.00000" Axis [00, 05] Center="1.00000" Axis [00, 06] Dead Zone="0.00000" // Controller 1 S0 Axis [00, 06] Sensitivity="0.50000" Axis [00, 06] Center="0.50000" Axis [00, 07] Dead Zone="0.00000" // Controller 1 S1 Axis [00, 07] Sensitivity="0.50000" Axis [00, 07] Center="0.50000" Axis [01, 00] Dead Zone="0.00000" // Controller 2 X Axis [01, 00] Sensitivity="0.50000" Axis [01, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues) Axis [01, 01] Dead Zone="0.00000" // Controller 2 Y Axis [01, 01] Sensitivity="0.50000" Axis [01, 01] Center="0.50000" Axis [01, 02] Dead Zone="0.00000" // Controller 2 Z Axis [01, 02] Sensitivity="0.50000" Axis [01, 02] Center="0.50000" Axis [01, 03] Dead Zone="0.00000" // Controller 2 RX Axis [01, 03] Sensitivity="0.50000" Axis [01, 03] Center="0.50000" Axis [01, 04] Dead Zone="0.00000" // Controller 2 RY Axis [01, 04] Sensitivity="0.50000" Axis [01, 04] Center="0.50000" Axis [01, 05] Dead Zone="0.00000" // Controller 2 RZ Axis [01, 05] Sensitivity="0.50000" Axis [01, 05] Center="0.50000" Axis [01, 06] Dead Zone="0.00000" // Controller 2 S0 Axis [01, 06] Sensitivity="0.50000" Axis [01, 06] Center="0.50000" Axis [01, 07] Dead Zone="0.00000" // Controller 2 S1 Axis [01, 07] Sensitivity="0.50000" Axis [01, 07] Center="0.50000" Axis [02, 00] Dead Zone="0.00000" // Controller 2 X Axis [02, 00] Sensitivity="0.50000" Axis [02, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues) Axis [02, 01] Dead Zone="0.00000" // Controller 2 Y Axis [02, 01] Sensitivity="0.50000" Axis [02, 01] Center="0.50000" Axis [02, 02] Dead Zone="0.00000" // Controller 2 Z Axis [02, 02] Sensitivity="0.50000" Axis [02, 02] Center="0.50000" Axis [02, 03] Dead Zone="0.00000" // Controller 2 RX Axis [02, 03] Sensitivity="0.50000" Axis [02, 03] Center="0.50000" Axis [02, 04] Dead Zone="0.00000" // Controller 2 RY Axis [02, 04] Sensitivity="0.50000" Axis [02, 04] Center="0.50000" Axis [02, 05] Dead Zone="0.00000" // Controller 2 RZ Axis [02, 05] Sensitivity="0.50000" Axis [02, 05] Center="0.50000" Axis [02, 06] Dead Zone="0.00000" // Controller 2 S0 Axis [02, 06] Sensitivity="0.50000" Axis [02, 06] Center="0.50000" Axis [02, 07] Dead Zone="0.00000" // Controller 2 S1 Axis [02, 07] Sensitivity="0.50000" Axis [02, 07] Center="0.50000" Find your axis for Speeder, Brake, and Wheel rotations - increase them to 1.00000 - Save changes! And you should be good to go.... Axis [00, 00] Dead Zone="0.04000" // Controller 1 X Axis [00, 00] Sensitivity="1.00000" Axis [00, 00] Center="0.50000" // 0.0=min, 0.5=center, 1.0=max (use to correct centering or split-axis issues) Axis [00, 01] Dead Zone="0.00000" // Controller 1 Y Axis [00, 01] Sensitivity="1.00000" Axis [00, 01] Center="1.00000" Axis [00, 02] Dead Zone="0.00000" // Controller 1 Z Axis [00, 02] Sensitivity="0.50000" Axis [00, 02] Center="0.50000" Axis [00, 03] Dead Zone="0.00000" // Controller 1 RX Axis [00, 03] Sensitivity="0.50000" Axis [00, 03] Center="0.50000" Axis [00, 04] Dead Zone="0.00000" // Controller 1 RY Axis [00, 04] Sensitivity="0.50000" Axis [00, 04] Center="0.50000" Axis [00, 05] Dead Zone="0.00000" // Controller 1 RZ
Well thanks for all your help but now the game chooses to just give up recognizing my throttle axis... things are getting worse...
Never ever use Logitech Profiler it's useless.. only use global setup and let game be able to do changes the response in the wheel is much better and accurate... Global seting is to 900% FFB to your liking and click let game change seting... then in game setup after your liking and it should be ok... But I say as someone already did I use 540% and use steering lock to ajust how fast the wheel turn. and that work perfect with my G27 in all sims.. Edit: I do have the Logitech profiler instaled but never touched it only setup wheel in windows controler setup..