Off track

Discussion in 'General Discussion' started by Leo Bosboom, Oct 3, 2019.

  1. Leo Bosboom

    Leo Bosboom Member

    Joined:
    Sep 29, 2019
    Ratings:
    +5 / 0 / -0
    Hi there,

    my car is drifting to much on track so my lap times will not count. When i am breaking my car is drifting. I have set my wing on max downforce but still drifting. This means that i can not as hard driving like the other cars they won't drift, what do i wrong?
    These are my settings.

    Please help
     

    Attached Files:

  2. Leo Bosboom

    Leo Bosboom Member

    Joined:
    Sep 29, 2019
    Ratings:
    +5 / 0 / -0
    This is my car setup.
     

    Attached Files:

  3. Olaf Hülse

    Olaf Hülse Well-Known Member Beta tester

    Joined:
    Jan 26, 2019
    Ratings:
    +505 / 0 / -0
    Can't see a problem with your settings...
    Maybe increase TC even more and select 'Countersteer Assist'.

    Oversteering is the result of being too agressive out of a corner in a RWD Driven Car, so try to be gentle on the throttle.
    With FWD, you loose the back end by lifting off too much going into a corner.

    I see you have selected the Silhouette Series. Normally, they should be pretty stable due to the front engine-rear drive concept plus the small amount of horsepower.

    A video might help for deeper insights!

    Greetings
     
  4. sbtm

    sbtm Well-Known Member

    Joined:
    Mar 29, 2016
    Ratings:
    +591 / 0 / -0
    maybe put brake balance more to the front. and try not to stand fully on the brakes while you're steering. full braking only in a straight line, then you can start trail braking into the corner (lift the brake pedal gradually when you start steering to stay in control).

    Also: a video could help us to better understand what's going on :)
     
    • Agree Agree x 1
  5. Leo Bosboom

    Leo Bosboom Member

    Joined:
    Sep 29, 2019
    Ratings:
    +5 / 0 / -0
    Thanks but how do i make a video?