Thread Close and move to general discussion

Discussion in 'Community Support' started by townnet, Jan 31, 2015.

  1. townnet

    townnet Member

    Joined:
    Jan 30, 2015
    Ratings:
    +21 / 0 / -0
    Auto clutch setting= Off
    As i know, paddle/sequential type car only have to input clutch when standing start (1st gear/reverse gear), other gear (2nd-6th) you no need to input clutch, but why the gear got damage?

    Auto clutch setting=On
    I drive very high speed (6th gear) and i down shift very quickly from 6th to reverse gear(i repeat do it many time), is totally weird there are no damage.
     
  2. Jay Ekkel

    Jay Ekkel Well-Known Member

    Joined:
    Jan 13, 2015
    Ratings:
    +411 / 0 / -0
    you will get damage to the gearbox when mechanical damage is turned on, if its turned off, you will not receive any mechanical damage.
     
  3. townnet

    townnet Member

    Joined:
    Jan 30, 2015
    Ratings:
    +21 / 0 / -0
    Auto clutch setting= Off
    I mean when i shifting paddle/sequential type gearbox 2nd, 3rd, 4th, 5th and 6th gear without input clutch, but i ends up with the gear damage. The gear box should not get damage even the mechanical damage is turned on.
     
    Last edited: Jan 31, 2015