Problem TM pedals not working properly

Discussion in 'Community Support' started by IronSabre, Jun 28, 2020.

  1. IronSabre

    IronSabre New Member

    Joined:
    Jun 28, 2020
    Ratings:
    +0 / 0 / -0
    Hello everyone, I recently bought a TM TMX, I initially had issues with even getting gas and brake to work after realizing they were not assigned to throttle or brake but after I assigned them there default value keeps getting set to 100, even if I set it to be reversed. Such as when the throttle is not applied it gives 100% and as I apply throttle the value lowers same thing happens on the brake as well, also my pedals are not recognized by the game but I’ve been reading that if you assign them on an edited profile they work. Thank you for any help
     
  2. majuh

    majuh Well-Known Member

    Joined:
    May 1, 2015
    Ratings:
    +150 / 0 / -0
    You could try the following thing when editing the key assignments: Press the pedal, then click on the throttle action, and then release the pedal. This way the pedal could be mapped in an inverted way.
     
  3. Peter Koch

    Peter Koch Well-Known Member Beta tester

    Joined:
    Jan 15, 2015
    Ratings:
    +163 / 0 / -0
    And check in the thrustmaster configuration panel is you use separate instead of combined pedals.
     
  4. IronSabre

    IronSabre New Member

    Joined:
    Jun 28, 2020
    Ratings:
    +0 / 0 / -0
    Thank you majuh works like a charm
     
    • Informative Informative x 1