Resolved Track width of the BMW Z4 GT3 and other GT3s

Discussion in 'Community Support' started by Arthur Spooner, Mar 26, 2020.

  1. Arthur Spooner

    Arthur Spooner Well-Known Member

    Joined:
    Feb 5, 2015
    Ratings:
    +432 / 0 / -0
    Hi everybody, I noticed that the track width of the Z4 is a bit off, as you can see on this screenshot:
    2020-03-26 16_55_21-Window.jpg
    The wheels are too far inside of the fenders, which makes the car look a bit silly. Like some idiot put unfit aftermarket rims on his car and didn't even use some spacers... ;)

    I think this is present since the big December update. I just always forgot to post it here.
     
    • Like Like x 2
  2. OldFart

    OldFart Active Member

    Joined:
    Aug 23, 2019
    Ratings:
    +31 / 0 / -0
    Good spot never noticed that myself
     
  3. Andi Goodwin

    Andi Goodwin Moderator Beta tester

    Joined:
    Jan 16, 2015
    Ratings:
    +790 / 0 / -0
    in the bug tracker

    Andi
     
    • Like Like x 1
  4. Arthur Spooner

    Arthur Spooner Well-Known Member

    Joined:
    Feb 5, 2015
    Ratings:
    +432 / 0 / -0
    OK...so today I wanted to run a few laps in an old time favorite of mine, the Alpina B6 GT3. And as soon as I entered the replay mode I noticed the same this as with the Z4 - the wheels are too far inside the fenders:

    20200424190052_1.jpg

    Having seen this on the second car now made me wonder if I find this issue with other cars too. So I had a look around the older GT3s and to my surprise found quite a few of them. On the old Audi the issue is more pronounced on the front wheels:

    20200424190622_1.jpg

    20200424191522_1.jpg

    20200424191848_1.jpg

    On the Mustang it's not as bad but still there:

    20200424191054_1.jpg

    Maybe you want to put a few more cars into the bug tracker @Andi Goodwin... ;)

    I have no idea which change on these cars caused this, but I'm quite sure I never saw it before the December patch. I could be wrong on this one though.

    And just to be safe: maybe you should look out for more of this, just in case I missed one... :D
     
  5. Andi Goodwin

    Andi Goodwin Moderator Beta tester

    Joined:
    Jan 16, 2015
    Ratings:
    +790 / 0 / -0
    i never check art bugs as im very blind

    Andi
     
    • Funny Funny x 1
  6. Arthur Spooner

    Arthur Spooner Well-Known Member

    Joined:
    Feb 5, 2015
    Ratings:
    +432 / 0 / -0
    Just felt the need to bump this issue after a while...any news on this one? ;-)

    111.jpg
     
    • Funny Funny x 2
  7. Arthur Spooner

    Arthur Spooner Well-Known Member

    Joined:
    Feb 5, 2015
    Ratings:
    +432 / 0 / -0