Hi @all, I have a triple setup with 3 LG 32K850G displays, powered by a GTX2080. They are setup to 144Hz and are connected with Lindy Cromo cables ans are placed in 60degree. I followed the instructions and setup the GPU to surround mode and the settings according to the measured dimensions. Now I have the problem that the picture on the side monitors "hang": A horizontal structure (e.g. pit wall) is horizontal on the front monitor but on the side monitors the top edge is "hanging". If I turn my head and look on the side the top edge of the horizontal structure goes down the more it goes towards the rear end. I hope my explanation was clear enough to understand. During driving this leads to some kind of sickness and dizziness. Is this a normal effect or where is my mistake? Another question: Is there a possibility to have a triple setup without GPU-surround-mode? It´s a bit uncomfortable to enable surround for RaceRoom and disable it for other stuff. Thanks for any hints and help. Greets from Germany Sven
Hi, sorry for the late reply. The main issue was my own carelessness...... ;-) I had a typo in the parameters: the vertical offset between gaze and middle of screen is 25mm and the parametzer was 250 !!! So after I removed the typo all is fine now.... BTW: I also opened a ticket at raceroom support with no response up to now...is this normal ? Regards Sven