Resolved Workaround if you cannot join your own dedi server

Discussion in 'Community Support' started by Christian G, Apr 1, 2016.

  1. CarrioN

    CarrioN New Member

    Joined:
    May 24, 2016
    Ratings:
    +1 / 0 / -0
    Ich habe eine 50k Leitung und den Speedport 724.
    In den Routereinstellungen habe ich unter Portfreischaltung, dynamische Portfreischaltung geändert:

    keine Vorlage
    Auslösender Port 5060
    Auslösendes Protokoll TCP
    Zu öffnende Ports:
    TCP 60000 - 60008
    UCP 60000 - 60008

    Hoffe du kannst mir helfen
     
  2. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    Die dynamische Portfreischaltung ist da das falsche Mittel der Wahl, lösch den Eintrag mal.
    Dann anstelle dessen eine Port-Weiterleitung einrichten. Dabei unter UDP und TCP die selben Ports freigeben und ganz wichtig bei "Gerät" Deinen Server auswählen, damit der Traffic auch zu diesem weitergeleitet wird.
    Im nächsten Schritt musst Du in Deiner/n Firewall(s) Regeln für die selben Ports erstellen damit diese auch nichts blockieren.
    Viel Erfolg, falls es nicht hilft einfach wieder melden, kriegen wa schon iwie hin. ;)
     
  3. CarrioN

    CarrioN New Member

    Joined:
    May 24, 2016
    Ratings:
    +1 / 0 / -0
    Puh, wenn du mir noch sagen kannst, was ich im Router für die Weiterleitung eingeben muss, bin ich einen Schritt weiter.
    Sorry, habs noch nie gemacht und bin auch bei RR ein Neuling :)

    Edit: Zumindest sind da mehrere Felder für Ports und bei Gerät finde ich keinen Server.
    Oder ich bin dumm ;-)
     
    Last edited: May 25, 2016
  4. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    Für den speedport gibts hier ne einfach gehaltene Anleitung:
    Ist zwar für ein anderes Spiel, daher andere Ports, aber das Prinzip ist genau richtig.
    Und wie gesagt, nach der Portfreischaltung auch in Antivirensoftware und Firewalls Raceroom zur Ausnahmeliste hinzufügen bzw. Ausnahmeregeln für die entsprechenden Ports einrichten. (Ist von Programm zu Programm unterschiedlich, einfach mal bei Deinem passenden Hersteller im Forum oder Handbuch suchen.)
     
  5. CarrioN

    CarrioN New Member

    Joined:
    May 24, 2016
    Ratings:
    +1 / 0 / -0
    Dank Dir. Werde morgen mal dran rumbasteln!
     
  6. CarrioN

    CarrioN New Member

    Joined:
    May 24, 2016
    Ratings:
    +1 / 0 / -0
    Update: Funktioniert. Vielen Dank! :)
     
    • Like Like x 1
  7. tim.friehe

    tim.friehe New Member

    Joined:
    Jun 2, 2016
    Ratings:
    +1 / 0 / -0
    Hello.
    I Have the following problem: I have a IPv6 Connetion
    Using your workaround I was able to join my own server, but nobody else could.
    Which IP I have to FWD? That one of the Loopback that or standard ethernet adapter? As you can see in the screenshot , there are muliple IPV6.
    Another problem is, that I can only FWD IPv6's. So the external Ipv4 of the loopback are useless to me :-(
    hope you can help
    Tim
     
    Last edited: Jun 2, 2016
  8. tim.friehe

    tim.friehe New Member

    Joined:
    Jun 2, 2016
    Ratings:
    +1 / 0 / -0
    Ps: The Image will follow, It seems I have not enough posts to be allowed to add Lnks :-(
     
  9. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    Hmm, that one I am interested in myself. But which IP did you insert in the loopbackadapter?

    If others can't connect it's a port forwarding thing, you have to forward the ports 60000-60003 for one server.
     
  10. tim.friehe

    tim.friehe New Member

    Joined:
    Jun 2, 2016
    Ratings:
    +1 / 0 / -0
    I've inserted this one 95.90.207.168
    if I use myip.is I get the Ip above but with the Hostname: "ip5f5acfa8.dynamic.kabel-deutschland.de"
    Using whatismyip i get a IPv6
     
  11. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    And in port forwarding, what did you put? Should rather ask, can you forward ports? Which router do you have?

    Oh and please remove the IPs, otherwise they're visible publicly which you don't neccessarily want.
     
  12. tim.friehe

    tim.friehe New Member

    Joined:
    Jun 2, 2016
    Ratings:
    +1 / 0 / -0
    I have FWD the ports: UDP:60000, 60002 TCP:60001 As shown in the server Ui.
    And i've FWD them to my PC (IPv6 default ethernet.) I am unable to enter the IP of the Loopback

    PS: my router is a hitron CVE-30360
     
  13. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
  14. tim.friehe

    tim.friehe New Member

    Joined:
    Jun 2, 2016
    Ratings:
    +1 / 0 / -0
    I had this info already. Was just hoping you R3E veterans had maybe found a functional workaround.
    Thank you to have verified my information :)
     
  15. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    As far as I'm aware there is no workaround for the issues connected to DS-LITE/v6-only. It's technically not possible, cause your v4 traffic gets stuffed into a v6 packet and then sent out to the ISP who then decapsulates it. Problem is outside clients aren't able to find your v4 address that way.
     
  16. Timo Heyden

    Timo Heyden Well-Known Member

    Joined:
    Jul 1, 2016
    Ratings:
    +66 / 0 / -0
    Hallo Christian,

    ich habe soweit alles im Griff und komme auf meinen Server.
    Allerdings kommen momentan noch andere nicht darauf.

    Ich denke dass es momentan noch an meinen Freigaben in Kaspersky liegt, dass dort der Port nicht freigeben ist.
    In Google finde ich leider keine Lösung und das Video hört leider genau an diesem Punkt auf.

    Hätte ich seine Einstellungen in der manuell angelegten Freigabe gesehen oder für das Spiel, dass er als Beispiel genommen hat wäre es viel leichter.

    Ich nutze aktuell Kaspersky mit der Version 16.0.0.614.

    Vielen Dank.
     
  17. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
  18. Timo Heyden

    Timo Heyden Well-Known Member

    Joined:
    Jul 1, 2016
    Ratings:
    +66 / 0 / -0
    @Christian Göpfert vielen Dank für deine schnelle Antwort. Ich habe das Problem gefunden und kann es leider nicht lösen, da es an dem Internetanbieter liegt.
    Wir haben für unsere Community nun aber eine andere Alternative gefunden.
    Eine weitere Frage habe ich noch:
    Besteht die Möglichkeit in den Einstellungen von RaceRoom Dedicated Servern festzulegen, dass nur das Default Setup der Fahrzeuge benutzt werden kann?
     
  19. Christian G

    Christian G Topological Agitator Beta tester

    Joined:
    Apr 8, 2015
    Ratings:
    +2,411 / 0 / -0
    Ok, solange Ihr ne Lösung gefunden habt, ist's ja zumindest halbwegs zufriedenstellend.

    Bzgl. der Setups: Das geht bisher nur indirekt indem man den Schwierigkeitsgrad des Servers auf Amateur stellt, dann kann jeder nur das Standardsetup benutzen. Da hat man dann aber (leider) auch mehr Fahrhilfen, vor allem Tranktionskontrolle. Aber geht schon, ist jetzt nicht völlig unrealistisch, die Physik ist an sich die gleiche. Probiert's doch einfach mal aus.
    In Get real sind die Setups offen, das kann man bisher nicht blockieren.
     
    • Like Like x 1
    Last edited: Jul 4, 2016
  20. P137r0

    P137r0 New Member

    Joined:
    Jul 5, 2016
    Ratings:
    +0 / 0 / -0
    @Christian Göpfert Hi. First of all, thank you for your "tutorial". Now I can join my server, but I created my server to play with some friends, but they can't join... can you explain me what I (or them) have to do? I followed another tutorial a few days ago that explains that I had to create an access file with "username : password" for every member and I've done it. I wrote my username and a my friend's username and the server's password but he can't join...what's the problem?