Hi there, I'm hoping for some help on wheel settings for a Logitech G920 (G29 also applies). Specifically I could do with some assistance on wheel lock settings. The wheel rotation settings are set to 900 degrees, but how do I customise the wheel lock? Earlier references to it seem to be removed in advanced settings. Driving out of the pit currently requires almost 360 degree rotation to prevent crashing into wall! Many Thanks, Kevin Greenway
That worked with the g27 but it will not work on the g29. Tried everything. Cant get out of pit without steering it "all down"
i am running a g29 and it works. (Dont mean to tell you how to suck eggs) Have you updated your logitech drivers? What is the range set to in the logitech software? Think mine is set to 540 wheel rotation in there. There are two places within Raceroom you can ammend. One in the main menu settings and another in car settings when in game.
Hey Kevin.... Like Squidboy, I'm running a G29 in Raceroom. take a look at your Logitech Gaming software wheel axis properties - you can adjust the rotation in there My settings are: Sensitivity: 75 Wheel range: 900 Centering Spring: off Spring Strength: 0 In Raceroom itself It's controlled in the "Car Setup" Go to "Steering Settings" and you'll see the top setting of "Wheel Range" Adjust this to where you like for EACH car! (Think I normally run at around 540) Also, just another little thing that may be causing your issue - I've noted this elsewhere in regards to the G29, just do a quick recalibration in the controls setup (simple full left/right lock) before hitting the track. I've found, as have others that for some reason some G29, G920's don't centre, and pull to the left or right on pit exit... Hope this helps, Chris