Just thought Id post a few things that have occured during the first week of the new patch. In no particular order , 100% not one off blips . These did not occur previsouly.( However never ran the web menus before either) Thought I would just bunch them as one "bug". I'm Happy to change that to a problem should you prefer Hopefully some one brighter than I will be able to shed some light on them. 1: Random De-activation/ blocking of USB serial ports for motion rig : Occurs at any time (even during a race) resulting in total loss of motion until rig restarted - Software used : Sim Tools 2.5.1 (remains active) . Occurance on any other sim - None. 2: Preselected "Default ?" / configured controller ( in this case Simplicity SW20v3) . Shut down and replaced with button box , pedals or handbrake as default during start up sequence. Have tried with a TS-PC and also had the same issue. 3: Occasional painfully slow loading sequences. - When this occurs Alt tabbing to task manager - R3E is not seen by win 10 as an app group in taskmanager ie Raceroom with several Web browsers attached inside. It is seen only as individual background tasks in Task managers' ie " as Background tasks". 4: Effects in FFB not shutting down. For example . Gear change effect - Straight after patch ie carry over settings kick was too( set at 3) much tried lessening it no change, Level to 0 ie off kick no change. Deletion of controller profile solved issue . As a check enabling it from default results in the same effect. No other effects tried since. Only checked against DD wheel. On a side note : System and software fully up to date. 21H1 Not installed, X570, R5900,3090 , 32Gb (2x16) Thanks for reading